Fix a Leak Week is celebrated in March of each year as a time to remind Americans to check their household fixtures and irrigation systems for leaks.
If you suspect you have a leak and need a plumber, call Cabinetry & Construction. Rob is a licensed plumber and can help you address all of your plumbing needs.
The Facts on Leaks:
- The amount of water leaked from U.S. homes could exceed more than 1 trillion gallons per year. That's equivalent to the annual water use of Los Angeles, Chicago, and Miami combined.
- Ten percent of homes have leaks that waste 90 gallons or more per day.
- Common types of leaks found in the home include leaking toilet flappers, dripping faucets, and other leaking valves. All are easily correctable.
- Fixing easily corrected household water leaks can save homeowners more than 10 percent on their water bills.
- Keep your home leak-free by repairing dripping faucets, toilet valves, and showerheads. In most cases, fixture replacement parts don't require a major investment and can be installed by do-it-yourselfers.
- The vast majority of leaks can be eliminated after retrofitting a household with new WaterSense labeled fixtures and other high-efficiency appliances.
Leak Detection:
- A good method to check for leaks is to examine your winter water usage. It's likely that a family of four has a serious leak problem if its winter water use exceeds 12,000 gallons per month.
- Check your water meter before and after a two-hour period when no water is being used. If the meter does not read exactly the same, you probably have a leak.
- One way to find out if you have a toilet leak is to place a drop of food coloring in the toilet tank. If the color shows up in the bowl within 15 minutes without flushing, you have a leak. Make sure to flush immediately after this experiment to avoid staining the tank.
Faucets and Showerheads:
- A leaky faucet that drips at the rate of one drip per second can waste more than 3,000 gallons per year. A home with WaterSense labeled toilets could use that water to flush for six months!
- Leaky faucets can be reduced by checking faucet washers and gaskets for wear and replacing them if necessary.
- A showerhead leaking at 10 drips per minute wastes more than 500 gallons per year. That's enough water to wash 60 loads of dishes in your dishwasher.
Toilets:
- If your toilet is running constantly, you could be wasting 200 gallons of water or more every day.
- If your toilet is leaking, the cause is most often an old, faulty toilet flapper. Over time, this inexpensive rubber part decays, or minerals build up on it.
- If you do need to replace the entire toilet, look for a WaterSense labeled model. If a family of four replaces its older, inefficient toilets with new WaterSense labeled ones, it could save more than 16,000 gallons per year. Retrofitting the house could save the family approximately $2,000 in water and wastewater bills over the lifetime of the toilets.
Outdoors:
- An irrigation system should be checked each spring before use to make sure it was not damaged by frost or freezing.
- An irrigation system with pressure set at 60 pounds per square inch that has a leak 1/32nd of an inch in diameter (about the thickness of a dime) can waste about 6,300 gallons of water per month.
- Check your garden hose for leaks at its connection to the spigot. If it leaks while you run your hose, replace the nylon or rubber hose washer and ensure a tight connection to the spigot using pipe tape and a wrench.
